Was good seeing the TDC and TDT starting again on Sunday. Hopefully in a years time we’ll be taking part!! Few bits done over the weekend. Started making some headlight blanks, the blanks themselves went well but made a horrendous...
Should be a shorter post this time as I’m up to date with the posts, this is the work I did over Easter weekend. I showed the scale pads I made in the last post and was keen to give...
Done a few bits since the last post. Coolant tank and catch can. Laguna uprights and PMS roll centre kit. Windows and windscreen. Temporary brake ducts. Corner weight scale levelling pads. Went for a radium...
Now for lots of smaller jobs I got done over Christmas. We had some debate and research on what the best form of ventilation was, we settled with a roof scoop to begin with and see how we get on....
Sorry been a while since the last post. Lots of smaller stuff been done over the last couple of months however. Following on from the last post I was at the stage of getting the engine started up with the...
It was that time to make a start of the engine wiring loom. Spent many evenings planning the loom out with a spreadsheet, plan was to have two Deutsch HDP20s as bulkhead connectors, the other side of which will be...
Continued mounting the ECU Master kit. Had started to make the keypad frame a while back, wanted to keep it bolt on so it was easy to make a new one if it needed to move or alter the design...
Really need to do these more often. Done a fair amount since the last post. Not sure if I mentioned it but found a small oil leak which looked like it was coming from the end of the gearbox....
Since the car is now running I wanted to tackle the wiring. The initial plan is to run the car with the standard ECU until we rebuild the engine with ITBs, cam etc then will go to a stand-alone ecu,...
